|
|
|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
|
ATV FAN |
I have this Honda with electric shift. It shifts good until I slow it down or stop it with either the hand
or food brake. Then the shift indicator blinks and I cannot shift it anymore. I have to turn the ignition off and then turn it on again and it will shift good until I hit either the hand or foot brake. Any help would be appreciated very much. Thanks in Advance: Karal |
||
|
|
"Team Emerson" Moderator |
The es models need to be downshifted as you slow down, they dont always want to shift more than one gear if you just stop them in gear.
08 Arctic Cat Prowler XT M4 Camo, The Big Bad Cat! Racked, 4K winch,108ss/Bighorns and lots more Member: Team Emerson "It Only Costs a Little More To Go First Class! "Team Emerson always picks up the trash" |
|||
|
|
ATV FAN |
To GunRunner: I guess I didn't explain my problem right.
I start the engine and then without moving just press the foot or hand brake and the shift indicator blinks and it won't shift. I have to turn the ingition off and then on and it will start and shift. Then I can ride around upshift and downshift just fine until I tap the brakes again. The shift indicator blinks and I have the same problem. Thanks in Advance for the Help. Karal |
|||
|
|
ATV MASTER |
Sounds like a bad angle sensor. But never heard of the brake having anything to do with it. The blinking indicator is giving a code.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2005 Honda Rincon 26" Wetlands 3000 Warn 2003 Polaris SP500 HO 27" Mud Bugs 3000 Ramsey |
|||
|
|
"Team Emerson" Moderator |
Yea, you might just have a loose or corroded electrical plug, try unpluging any plugs and apply some dielectric grease to them, check battery cables to. The only connection between brakes and shifting is a nuetral safty switch but that only controls starting in gear not shifting. The es only uses a electrical solenoid to move manual shift lever up or down,its just loosing a good hot or ground connection somewhere, or it could be a bad shift solenoid but thats doubtful on that new a model.
08 Arctic Cat Prowler XT M4 Camo, The Big Bad Cat! Racked, 4K winch,108ss/Bighorns and lots more Member: Team Emerson "It Only Costs a Little More To Go First Class! "Team Emerson always picks up the trash" |
|||
|
|
ATV FAN |
I am currently having almost the same problem, only my gear selection indicator just blinks. Starts fine, but wont shift.
|
|||
|
|
ATV FAN |
We still haven't figured out the problem. He has both of the brake switches disconnected. It works fine that way.
We don't go on the road with it. So we let it be. Thanks: Karal |
|||
|
|
ATV FAN |
hey if that dont work you might need to replace the angle sensor on the side of the trans it tells the trans its ok to shift if you have a es it will also not let you sift all the time it will flash the code for it going bad on the green nutral light it will be flashing the new angle sensor is about 35-50 dollars but if you call your local honda shop if it is original like mine was parts and labor is a recall from honda and its free lol
2007 yamaha GRIZZLY 660 26" ITP Mudlite XL's tusk rear box checkerd aluminum Arm gaurds Garmin Rhino gps with ram mounts big gun exhaust jet kit extended rear rack for party supplies |
|||
|
| Previous Topic | Next Topic | powered by eve community |
| Please Wait. Your request is being processed... |
|

